SE-5718 Wall-Mounted Network Speaker

Product Description:

1. Professional integrated wall-mounted design with ABS impact-resistant material exterior. Curved sound dispersion surface delivers clear, resonant audio with wide coverage angle.

2. Stacked enclosure design provides 4.5-liter volume. Curved waterproof construction enhances acoustic principles for richer, fuller sound.

3. Four mounting options: horizontal U-bracket, vertical U-bracket, 75° V-bracket radiation angle, or grommet wall mount;

4. Equipped with a 5.5-inch fabric-cone woofer and 20-core 3-inch silk-dome tweeter, ensuring seamless mid-to-high frequency transition;

5. Service software enables remote volume adjustment, scheduled or live audio playback, with local knob control for microphone input volume;

6. Features 1 microphone input, 1 line input, 1 line output, 1 short-circuit input, 1 short-circuit output, 1 IO output, 1 IO input, with 485 expansion support;

7. Includes a power switch to disable speaker power when needed, ensuring system safety;

8. Features one 30W constant-impedance output with Phoenix connectors for connecting to subwoofers;

9. Dual line input backup functionality with intelligent switching between 100V constant voltage and IP network, with a switching time <10ms;

10. Standard RJ45 network interface enables connection wherever an Ethernet port is available, supporting cross-subnet and cross-router connectivity;

11. Supports real-time reception of server audio broadcasts;

12. Supports remote server zone grouping and management;

13. Supports remote server parameter modification.

 

Technical Specifications:

Power: 30W (rated)/60W (peak)

Network Protocols: TCP, UDP, ARP, HTTP, FTP, etc.

Network Chip Rate: 10/100Mbps

Audio Encoding: WAV, MP3, PCM, OPUS

Audio Sampling Rate & Bit Rate: 8KHz-44.1KHz, 16-bit, 8Kbps-768Kbps

Signal-to-Noise Ratio: ≥90dB

Network Audio Latency: Broadcast delay ≤100ms

Speaker Units: 5.5″ × 1, 3″ × 1

Frequency Response: 60Hz-18KHz

Sensitivity: 97dB±3dB

Interfaces: RJ45×1, USB×1 (reserved expansion port), mic×1, DC 24V×1,Phoenix connectors×2 sets

Enclosure Dimensions (WxDxH): 200mm×155mm×300mm

Net Weight: 2.90kg