SE-5705 Rack-Mount Network Audio Capture Device

Product Description:

1. Standard 1U rack-mount design with full aluminum alloy industrial panel for a sleek, professional appearance;

2. Primarily enables interconnectivity with servers, reporting real-time operational status;

3. Supports real-time streaming media data transmission via the internet;

4. Allows configuration of parameters such as IP address and server address through the server interface;

5. Enables real-time capture of 6 analog audio inputs to designated zones or terminals;

6. Enables local or remote activation of any audio channel for automatic mixing;

7. Supports local monitoring for real-time operational status tracking;

8. Features local channel status indicators and analog audio level meters; independent input volume control; ≥2 XLR inputs, ≥2 RCA inputs;

9. Allows binding of active audio capture zones via front-end interface;

10. Supports binding settings for audio capture priority and volume via the front-end interface;

11. Enables real-time channel activation through the platform interface, with flexible playback zone configuration (channel, priority, volume) based on actual conditions;

12. Supports creating scheduled tasks on the platform interface to initiate audio capture;

13. Supports remote firmware upgrades via server.

 

Technical Specifications:

Network Protocols: TCP, UDP, ARP, HTTP, FTP, etc.

Network Chip Rate: 10/100/1000Mbps

Audio Encoding Formats: MP3, PCM

Audio Mode: 48000Hz, 16Bits (Superior to CD Quality)

Sampling Rate: 8K-48KHz

Bitrate: 64Kbps~768Kbps

Network Latency: Audio ≤30ms

Input Sensitivity/Impedance: MIC 15mV/600Ω unbalanced TS jack input;AUX 350mV/10KΩ unbalanced XLR/RCA jacks

Output Sensitivity/Impedance: 800mV/470Ω unbalanced XLR/RCA jacks

Signal-to-Noise Ratio: ≥90dB

Frequency Response: 20Hz-20KHz

Maximum Power Consumption: 10W (Peak)

Power Supply: AC 220V/50-60Hz

Product Dimensions (W×D×H): 483×300×44mm